Rapid Reel® - Hose Reels

Yes. The 4400 series is designed with an exclusive and versatile “bolt-on” design. This innovative mounting system enables the reels to mount attached to a variety of mounting options. See Mounting Options for more details.

Yes, when used in conjunction with the Tubular Base mounting option (part # 0.2001.037). See Mounting Options for more details.

Yes. However, keep in mind that this will void the 2-year No-Leak guarantee. Although this reel is equipped with a chemical resistant stainless and brass swivel, harsh chemicals – such as aluminum brightener or other caustic chemicals – will dramatically shorten the life of the swivel and interior axle.

Our high-pressure swivels are equipped with Viton® o-rings.

Our industrial grade products are sold exclusively through a nationwide network of independent industrial equipment dealers. These qualified dealers will not only make sure you get equipped with the proper reel for your particular application, but are also there to provide valuable after-sale service if such a need arises. To find the dealer nearest to you, see Find Local Dealer.

Yes. Consult your local dealer for replacement parts. To find the dealer nearest to you, see Local Dealer.

Yes. All of Rapid Reel’s high-pressure swivels use the same repair kit (part # 5004.003). Installation of the seal kit DOES NOT require the use of any special tools. However, you will need a dental pick or similar device to remove the old seals.

No. Because of the special requirements of each particular application (1/2” vs. 3/8” hose, single-wire vs. double-wire, rigid fitting vs. swivel fitting, length, etc.), Rapid Reel does not equip high-pressure reels with an inlet hose. A suitable inlet hose can usually be obtained through local dealers who carry hydraulic hose products, such as pressure washers, fluid power, heavy equipment or farm implement dealerships. For this model, you will want at least one end of the inlet hose (the end that threads into the swivel) to be equipped with a rigid 3/8” male NPT steel fitting.

Rapid Reel’s largest capacity pressure washer reels are the 4416 and 5516 models. These two models will hold up to 200 feet of single wire 3/8” ID hose. However, keep in mind that 200 feet will fill it to the rim. The capacity we recommend for “comfortable” use on these two models is 175 ft. of 3/8” hose.

No. Our semi-gloss black paint has proven to be an ideal fit for most consumer and commercial applications. This universally neutral color also keeps the reel looking good by helping hide the dirt and grime.

Yes. All industrial pressure washer reels are equipped with 3/8” swivels standard. However, the remainder of the reel is plumbed for 1/2” flow. To convert the reel for 1/2” flow, simply replace the standard 3/8” swivels with our 1/2” swivels (part # 0.5004.007). We recommend that you have your local dealer retrofit the reel for you since the reels are not sold with 1/2” swivels, nor can the 3/8” swivels be returned for credit.

At this time, Rapid Reel specializes in manual rewind hose reels only. Currently, the model AR134-RR is the only air hose reel we produce.

Not at this time. Our industrial reels are constructed of high-grade steel and painted with a durable powder coat finish.

Yes, you can add a hose guide to 4400 series hose reels as long as the axle plate stays horizontal when mounted. It will not work when wall mounting the reel with the axle #2001.037 as the axle is turned vertical in this mounting application. It will work on all support arms, or when mounted to axle #0.2001.037 that is deck, floor, or bench top mounted.

Yes, You can use wall bracket #0.2001.003 and the 90º support arm (part #0.2001.026) which then will allow you to mount the 4400 series reel parallel to the wall. This is not recommended for over-the-road mountings, as the support arm is not permanently attached to the wall bracket. see Mounting Options for more details.

It is not recommended. Many industrial hot water pressure washers are equipped with a steam option and are sometimes referred to as “combo” units. Wet steamers can reach temperatures around 300°F, and although this reel is rated at 325°F, we do not recommend you run wet or dry steam through it. The heat build-up within the hose still wrapped on the reel can create hose failure. In addition, most of the benefit from the high heat is lost the longer the distance it has to travel through a hose. If you want to use steam, we recommend that you bypass the reel with a 15-20-foot steam hose.